Product information:

First, product overview

Standard number:

GB18173.1-2000 chlorination polythelene rubber blend waterproofing membrane is in blends of chlorinated polyethylene resin and synthetic rubber as the main body, adding an appropriate amount of accelerator, steady

Set agent, softening agent and filler, after plasticizing, mixing, filtering, rolling or extrusion) formation, inspection, and volumes, packaging and other processes of

High elastic waterproof coiled material. The waterproof coiled material has the characteristics of plastics and rubber, and has the advantages of high strength and high strength.

Different from the ozone resistance, aging resistance, but also has a high elasticity of rubber materials, high elongation and good low temperature flexibility. Such synthesis

Polymer blend modified materials, in the industry is called the polymer "alloy".

Two, the scope of application

The product is suitable for roofing, basement, tunnel, cave, reservoir, water tank, sewage treatment, drainage pipe channel, floor, bathroom, toilet, etc.

Waterproof and moisture proof. It is particularly suitable for waterproof and roof projects with high waterproof requirement.

Three, construction method

One

According to the design of the roof in the survey, there are no discrepancies with the design, if there should be a timely manner to the competent authorities.

Two

Construction organization design, including: determine the ditching line, waterline, the shop posted location arrangements, the special position of nodes in a large sample

Work schedule and construction quality standards.

Three

Thorough cleaning of the roof, and must not allow the presence of sand and gravel, this work throughout the whole process of construction.

4, according to the design and construction, in the roof gutter pop-up center and diversion center line, before the large area of the shop is stuck, and the special parts such as gutter, eaves

Ditch and parapet, wall, Shuila mouth, out of the roof of the pipeline and equipment based on angle and Yin Yang corner of waterproof coating is coated or affixed to the additional layer

(strengthening belt), on the gap filling block and sealing material overlay additional layer.

Five

The first bar to lay the material, the base line, from the downhill to the direction of the upward slope of the rest of the line of the line.

Six

The coil side alignment the first datum line, the natural loose.

Seven

, by the direction of a long edge of the folded sheet, according to certain types of paste on the coiled material and the base roll coated with adhesive, the adhesive roller coating should be uniform.